 |
» |
|
|
|
Symbols- /etc/dfs/dfstab
- and nfsd, Exporting a File System (HP-UX to HP-UX)
- /etc/inetd.conf, Adding a Remote Printer to the LP Spooler
- /etc/services, Adding a Remote Printer to the LP Spooler
- /stand/vmunix, Kernel file selection:, Booting from an Alternate Kernel File
- /usr
- extending logical volume, Extending a Logical Volume When You Can’t Use HP SMH
- /usr/share/lib/terminfo/*, Setting Up Non-HP Terminals
- /var/adm/fbackupfiles/dates, Backup Levels
- /var/adm/inetd.sec, Adding a Remote Printer to the LP Spooler
- 2 GB files, Managing Large Files
A- abnormal system
shutdowns, Configuring Dump Devices
- abort boot, Breaking Out of the Boot Screen
- accept, Controlling the Flow of Print Requests, Adding a Local Printer to the LP Spooler, Creating a Printer Class
- accessing multiple
systems, Accessing Multiple Systems
- ACPI configuration
for HP-UX, ACPI Configuration for HP-UX Must Be “default” on nPartitionable HP Integrity Servers
- adding a disk
- HP SMH, Adding a Disk to a Volume Group
- adding
a logical volume
- HP SMH, Adding a Logical Volume
- adding
logical volume with mirroring
- HP SMH, Adding a Logical Volume with Mirroring
- adding network
printer, Adding a Network-Based Printer
- adding peripherals, Adding Peripherals
- adding printer
- commands, Adding a Local Printer to the LP Spooler
- adding remote printer, Adding a Remote Printer to the LP Spooler
- adding
user to several systems, Adding a User to Several Systems: A Case Study
- adding
users
- workgroup, Adding Users to a Workgroup
- all system
self test, SpeedyBoot Tests, Using setboot to Configure SpeedyBoot Settings
- ALT. See alternate boot
path, Booting into Single-User Mode
- Alternate boot path
- setting using the setboot
command, Setting the PRI, HAA, and ALT Boot Paths Using the HP-UX setboot Command:
- setting via the Boot Console
Handler, Setting the ALT (Alternate Boot Path) Using the BCH, Setting the ALT (Alternate Boot Path) Using the BCH
- alternate boot path, Boot device selection:, Changing the PRI, HAA, and ALT Boot Paths, Boot device selection:, Changing the PRI, HAA, and ALT Boot Paths, Booting into Single-User Mode
- alternate
kernel file, Booting from an Alternate Kernel
- asynchronous
writes, Checking for Asynchronous Writes
- AUTO file, Load and initiate the HP-UX operating system:
- AUTO file. See autoexecute file, Automatic Versus Manual Booting
- AUTO. See autoexecute file, Changing the Contents of the Autoexecute File
- autoboot flag, Enable Autoboot (using EFI Shell’s autoboot command), Enabling / Disabling Autoboot
- autoexecute file, Automatic Versus Manual Booting, Using the EFI Shell to Manually Boot Your System, Load and initiate the HP-UX operating system:, Changing the Contents of the Autoexecute File
- changing contents of, Changing the Contents of an AUTO File on a Boot Device, Changing the Contents of the Autoexecute File
- changing from running system, Changing the Contents of an AUTO File on a Boot Device
- displaying contents
of, Changing the Contents of an AUTO File on a Boot Device
- selecting correct device, Changing the Contents of an AUTO File on a Boot Device
- automatic
boot
- autoboot file, Automatic Versus Manual Booting
- autoboot flag, Automatic Versus Manual Booting
- autoboot timeout, Adjusting the Autoboot Delay, A Standard Boot (PA-RISC Systems)
- disabling, Enabling / Disabling Autoboot
- enabling, Enabling / Disabling Autoboot
- automatic
booting
- autoboot file, Changing the Contents of an AUTO File on a Boot Device
- autoboot flag, Enable Autoboot (using EFI Shell’s autoboot command)
- disabling, Setting the autoboot delay using the EFI Shell’s autoboot command:
- enabling, Setting the autoboot delay using the EFI Shell’s autoboot command:
- overriding, Overriding an Automatic Boot, Booting from an Alternate Kernel File, Overriding an Automatic Boot
- autosearch flag, Enabling / Disabling Autoboot
B- backup
- JFS snapshot
file system, Backing Up a JFS Snapshot File System
- tar quick
reference, Backing Up and Recovering Directories: Quick Reference for tar
- tar, scheduling, Scheduling a cron Job
- backups
- automating, Setting Up an Automated Backup Schedule
- determining how often, Determining How Often to Back Up Data
- determining which data, Determining What Data to Back Up
- DLT tape, Examples of fbackup Commands
- fbackup, General Procedure for Using the fbackup Command
- full, Full Backups vs. Incremental Backups
- included files, Defining What Files and Directories to Back Up
- incremental, Full Backups vs. Incremental Backups
- index files, Creating the Index File on the Local Device
- JFS snapshot file system, Backing Up a JFS Snapshot File System
- large files, Backing Up Large Files
- LVM, Backing Up If You Are Using LVM
- magnetic tapes, General Procedure for Using the fbackup Command
- media capacity, Choosing the Type of Storage Device
- Omniback, Choosing HP Omniback for Backup
- remote
system, Backing Up Files on a Remote System
- restoring data, Determining What Data to Restore, Restoring Your Data Using HP-UX Commands
- storage device, Choosing the Type of Storage Device
- tar, Backing Up and Recovering Directories: Quick Reference for tar
- utilities, Choosing the Type of Storage Device
- BCH. See Boot
Console Handler, Setting the Value of the autoboot Flag
- block size
- NFS
read/write, Checking NFS Server/Client Block Size
- Boot Console Handler, Booting into Single-User Mode
- boot command, Booting from an Alternate Device
- configuring system self tests, Speeding the Boot: SpeedyBoot, Configuring Boot-Time System Tests from the BCH Menu (HP 9000 Systems Only)
- setting ALT boot path, Setting the ALT (Alternate Boot Path) Using the BCH, Setting the ALT (Alternate Boot Path) Using the BCH
- setting autoboot/autosearch flags, Setting the Value of the autoboot Flag
- setting boot paths, Changing the PRI, HAA, and ALT Boot Paths
- setting HAA boot path, Setting the HAA (High-Availability Alternate Boot Path) Using the BCH
- setting PRI boot path, Setting the PRI (Primary Boot Path) Using the BCH
- boot devices
- listing, Booting from an Alternate Boot Device, Booting from an Alternate Kernel File, Changing the Contents of an AUTO File on a Boot Device, Booting into Single-User Mode
- boot loader, Load and initiate the HP-UX operating system:, Using the EFI Shell to Manually Boot Your System, Booting from an Alternate Boot Device
- hpux, Booting from an Alternate Kernel, Booting into LVM Maintenance Mode
- boot manager. See EFI Boot Manager, Overriding an Automatic Boot
- boot paths
- alternate, Boot device selection:, Changing the PRI, HAA, and ALT Boot Paths, Boot device selection:, Changing the PRI, HAA, and ALT Boot Paths
- changing, Changing the PRI, HAA, and ALT Boot Paths, Changing the PRI, HAA, and ALT Boot Paths
- High-Availability
Alternate, Boot device selection:, Changing the PRI, HAA, and ALT Boot Paths, Boot device selection:, Changing the PRI, HAA, and ALT Boot Paths
- primary, Boot device selection:, Changing the PRI, HAA, and ALT Boot Paths, Boot device selection:, Changing the PRI, HAA, and ALT Boot Paths
- setting, Changing the PRI, HAA, and ALT Boot Paths, Changing the PRI, HAA, and ALT Boot Paths
- boot sequence
- on HP 9000 Systems, Booting HP-UX on HP 9000 (PA-RISC) Systems: Details and Variations
- on HP Integrity Servers, Booting HP-UX on HP Integrity Servers: Details and Variations
- standard, A Standard Boot, Booting HP-UX on HP 9000 (PA-RISC) Systems: Details and Variations
- booting
- accelerating, Speeding the Boot: SpeedyBoot
- automatic versus manual, Load and initiate the HP-UX operating system:, Automatic Versus Manual Booting
- breaking out of boot screen, Breaking Out of the Boot Screen
- from an alternate boot source, Booting from an Alternate Boot Source
- from an alternate device, Booting from an Alternate Boot Device, Booting from an Alternate Device
- from an alternate kernel file, Booting from an Alternate Kernel File, Booting from an alternate kernel file called “testvmunix”, Booting from an Alternate Kernel
- HP 9000 Systems, Booting HP-UX on HP 9000 (PA-RISC) Systems: Details and Variations
- HP Integrity Servers, Booting HP-UX on HP Integrity Servers: Details and Variations
- LVM maintenance mode, Booting into LVM (or VxVM) Maintenance Mode, Booting into LVM Maintenance Mode
- primary boot path, Booting from an Alternate Kernel
- single-user mode, Booting into Single-User Mode, Boot HP-UX in single-user mode on an HP 9000 System:, Single-User Mode
- SpeedyBoot, Speeding the Boot: SpeedyBoot
- boottest, Configuring Boot-Time System Tests from the EFI Shell (HP Integrity Servers Only)
- building a depot, Setting up a Network Host (Building a Depot)
C- C shell
- environment variable, Setting Up Non-HP Terminals
- cancel, Summary of Additional Printer Tasks, Solving Common Printer Problems
- CEC system self test, SpeedyBoot Tests
- checking
NFS server/client block size, Checking NFS Server/Client Block Size
- checking run level, Checking the System’s Run Level
- Chipset system self
test, SpeedyBoot Tests
- client
- performance, Managing System Performance
- command
- adding
printer, Adding a Local Printer to the LP Spooler
- boot, Booting into LVM (or VxVM) Maintenance Mode, Booting from an Alternate Device, Booting into Single-User Mode
- boottest, Configuring Boot-Time System Tests from the EFI Shell (HP Integrity Servers Only)
- efi_cp, Changing the Contents of an AUTO File on a Boot Device
- getty, Unresponsive Terminals
- init, Unresponsive Terminals
- kill, Unresponsive Terminals
- lifcp, Changing the Contents of the Autoexecute File
- ll, Unresponsive Terminals
- lsautofl, Changing the Contents of the Autoexecute File
- lssf, Unresponsive Terminals
- lvdisplay, Determining the EFI disk partition of your current boot device using LVM
- map, Booting from an Alternate Boot Device, Booting from an Alternate Kernel File, Changing the Contents of an AUTO File on a Boot Device, Booting into Single-User Mode
- mkboot, Changing the Contents of the Autoexecute File
- ps, Unresponsive Terminals
- reboot, Booting into LVM Maintenance Mode
- set (shell command), What to check for when everything printed is garbage
- setboot, Enable Autoboot (using EFI Shell’s autoboot command), Setting the PRI, HAA, and ALT Boot Paths Using the HP-UX setboot Command:, Determining the EFI disk partition of your current boot device using LVM, Setting Autoboot and Autosearch Flags Using the HP-UX setboot Command, Enabling the Autosearch Flag Using setboot, Changing the PRI, HAA, and ALT Boot Paths, Booting PA-RISC Systems from an Alternate Boot Source, Displaying Current SpeedyBoot Settings for your System (HP 9000 sample output), Configuring Boot-Time System Tests from a Booted System, Using setboot to Configure SpeedyBoot Settings
- shutdown, Normal (Planned) Shutdown
- stty, Unresponsive Terminals, What to check for when everything printed is garbage
- telinit, Unresponsive Terminals
- wall, Normal (Planned) Shutdown
- who, Unresponsive Terminals
- command line
- extending a logical volume, Extending a Logical Volume When You Can’t Use HP SMH
- reducing a logical volume, Reducing a Logical Volume
- sharing a file system, Exporting a File System (HP-UX to HP-UX)
- configuring
- tunable kernel parameters, Configurable Kernel Parameters
- workgroup, Managing Printers
- connecting
cables, Unresponsive Terminals
- copying
software from depot, Copying Software From a Depot with the SD User Interface
- copying software from DVD, Copying Software From DVD
- copying
software from tape, Copying Software From Tape
- copyutil, Recovering From a System Crash
- cpio, Choosing the Type of Storage Device
- crash recovery, Determining What Data to Restore
- cron
- scheduling a job, Scheduling a cron Job
- crontab, Creating an Automated Backup Schedule, Activating an Automated Backup Schedule
- editing, Creating an Automated Backup Schedule
- crontab,
editing, Creating an Automated Backup Schedule
D- daemon
- Internet, Adding a Remote Printer to the LP Spooler
- dates file, Backup Levels
- defragmenting a file system, Making Changes
- defragmenting
an HFS file system, Defragmenting an HFS File System
- defragmenting
VxFS, Defragmenting a JFS File System
- depot
- copying software, Copying Software From a Depot with the SD User Interface
- device file, Unresponsive Terminals
- diagnostic performance tool
- GlancePlus, GlancePlus and GlancePlus Pak
- diagramming
system’s disk usage, Diagramming a System’s Disk Usage
- directory
- moving, Moving a Directory (within a File System)
- sorting by size, Finding Large Files
- working,
returning to last, Popping the Directory Stack
- disable, Enabling or Disabling a Printer, Solving Common Printer Problems, Removing a Printer from the LP Spooler
- disk
- adding, Adding a Disk to a Volume Group
- diagramming
system’s disks, Diagramming a System’s Disk Usage
- load, measuring, Checking Disk Load with sar and iostat
- performance, Managing System Performance
- disk
usage
- diagram, Diagramming a System’s Disk Usage
- displaying file
system characteristics, Examining File System Characteristics
- DLT tape
- backup, Examples of fbackup Commands
- downtime
- continuing to work, Continuing to Work During a Scheduled Downtime
- dump, Choosing the Type of Storage Device
- DVD
- copying software, Copying Software From DVD
- dynamic tunable
kernel parameters, Configurable Kernel Parameters
E- early_cpu system
self test, SpeedyBoot Tests
- EFI
- determining EFI disk partition, Determining the EFI disk partition of your current boot device using LVM
- full screen
editor, Changing the Contents of an AUTO File on a Boot Device
- EFI Boot Manager, Overriding an Automatic Boot
- setting boot paths, Setting the PRI, HAA, and ALT Boot Paths Using the Boot Option Maintenance Menu in the EFI Boot Manager:
- setting the autoboot timeout, Adjusting the Autoboot Delay
- EFI file system
- copying files from, Changing the Contents of an AUTO File on a Boot Device
- EFI shell
- changing autoexecute file, Changing the Contents of an AUTO File on a Boot Device
- configuring system self tests, Configuring Boot-Time System Tests from the EFI Shell (HP Integrity Servers Only)
- EDIT command, Changing the Contents of an AUTO File on a Boot Device
- manual boot, Using the EFI Shell to Manually Boot Your System
- map command, Booting from an Alternate Boot Device, Booting from an Alternate Kernel File, Changing the Contents of an AUTO File on a Boot Device, Booting into Single-User Mode
- setting autoboot timeout, Setting the autoboot delay using the EFI Shell’s autoboot command:
- setting
the autoboot flag, Enable Autoboot (using EFI Shell’s autoboot command)
- efi_cp, Changing the Contents of an AUTO File on a Boot Device
- EMS, Kernel Resource Monitor (KRM)
- enable, Enabling or Disabling a Printer, Solving Common Printer Problems
- environment
variable
- PATH, Normal (Planned) Shutdown
- TERM, Setting Up Non-HP Terminals
- Event Montoring Service, Kernel Resource Monitor (KRM)
- extending a logical volume
- HP SMH, Extending a Logical Volume
- extending logical volume
- command line, Extending a Logical Volume When You Can’t Use HP SMH
F- FASTBOOT
system self test, SpeedyBoot Tests, Configuring Boot-Time System Tests from the BCH Menu (HP 9000 Systems Only)
- fbackup
- active files, General Procedure for Using the fbackup Command
- comparing, Choosing the Type of Storage Device
- examples, General Procedure for Using the fbackup Command
- included
files, Defining What Files and Directories to Back Up
- NFS mount
points, Restoring Your Data Using HP-UX Commands
- fence priority, Setting a Printer’s Fence Priority
- file
- /etc/fstab, Unclean Shutdowns
- /etc/inittab, Unresponsive Terminals
- /etc/resolv.conf, Name Server
- /etc/shutdown.allow, Normal (Planned) Shutdown
- /stand/vmunix, Kernel file selection:, Booting from an Alternate Kernel File
- AUTO, Load and initiate the HP-UX operating system:
- file server, Guidelines
- sharing
file systems, Exporting a File System (HP-UX to HP-UX)
- sharing home directories, Adding a User to Several Systems: A Case Study
- file size, Finding Large Files
- file system
- characteristics, examining, Examining File System Characteristics
- defragmenting, Making Changes
- large files, Creating a Large-Files File System
- sharing, Exporting a File System (HP-UX to HP-UX)
- file system
consistency checker, Unclean Shutdowns
- files
- included, Defining What Files and Directories to Back Up
- fileset
- NONHPTERM, Setting Up Non-HP Terminals
- find large files, Finding Large Files
- firmware
- boot path actions, A Standard Boot (PA-RISC Systems)
- frecover
- active files, Restoring Your Data Using HP-UX Commands
- comparing, Choosing the Type of Storage Device
- crossing NFS mount points, Restoring Your Data Using HP-UX Commands
- examples, Creating the Index File on the Local Device, Examples of Restoring Data
- index file on device, Creating the Index File on the Local Device
- restoring data, Restoring Your Data Using HP-UX Commands
- fsck, Unclean Shutdowns
- ftp
- configuration files, Managing FTP
- displaying user information, Getting Information about FTP Users
- ftp logging, Logging FTP Session Information
- ftp shutdown message, Creating an FTP Shutdown Message
- virtual ftp support, Setting Up Virtual FTP Support
- full backups, Full Backups vs. Incremental Backups
- Full_memory system
self test, SpeedyBoot Tests
- full_memory system
self test, SpeedyBoot Tests, Using setboot to Configure SpeedyBoot Settings
- fuser
- and NFS, Extending a Logical Volume
H- hardcopy diagram
- of server’s disks, creating, Diagramming a System’s Disk Usage
- hardware
- terminals, Unresponsive Terminals
- hardware self
tests
- see system self tests, Speeding the Boot: SpeedyBoot
- HFS file system
- defragmenting, Defragmenting an HFS File System
- High-Availability Alternate boot path, Boot device selection:, Changing the PRI, HAA, and ALT Boot Paths, Boot device selection:, Changing the PRI, HAA, and ALT Boot Paths
- setting using the setboot command, Setting the PRI, HAA, and ALT Boot Paths Using the HP-UX setboot Command:
- setting
via the Boot Console Handler, Setting the HAA (High-Availability Alternate Boot Path) Using the BCH
- home directory
- importing from server, Adding a User to Several Systems: A Case Study
- HP 9000 Systems
- booting, Booting HP-UX on HP 9000 (PA-RISC) Systems: Details and Variations
- booting to single-user mode, Boot HP-UX in single-user mode on an HP 9000 System:
- HP Integrity Servers
- booting, A Standard Boot
- booting to single-user mode, Booting into Single-User Mode
- manually booting, Using the EFI Shell to Manually Boot Your System
- HP JetDirect, Adding a Network-Based Printer
- HP SMH, HP System Management Homepage (HP SMH)
- adding a disk, Adding a Disk to a Volume Group
- adding a local printer, Adding a Local Printer to the LP Spooler
- adding a logical volume, Adding a Logical Volume
- adding a
remote printer, Adding a Remote Printer to the LP Spooler
- adding LV
with mirroring, Adding a Logical Volume with Mirroring
- adding network-based printer, Adding a Network-Based Printer
- adding printer, Initializing the LP Spooler
- asynchronous writes, Checking for Asynchronous Writes
- automated
backup schedule, Setting Up an Automated Backup Schedule
- diagramming server’s disks, Diagramming a System’s Disk Usage
- enabling or disabling a printer, Enabling or Disabling a Printer
- extending
a logical volume, Extending a Logical Volume
- order of printing, Setting a Printer’s Fence Priority
- print requests, Controlling the Flow of Print Requests
- printer class, Creating a Printer Class
- removing a logical volume, Removing a Logical Volume
- removing a mirror from a logical volume, Adding a Mirror for an Existing Logical Volume Using Non-strict Mirroring, Adding a Mirror to an Existing Logical Volume Using Strict Mirroring
- sharing file system, Exporting a File System (HP-UX to HP-UX)
- stopping and restarting the LP spooler, Stopping and Restarting the LP Spooler
- web client, Starting an HP SMH Web Client
- HP System
Insight Manager, HP Systems Insight Manager
- HP
System Management Homepage (see HP SMH)
- web-based, System Management Homepage (Web-Based)
- HP-UX
- supported architectures, Booting Systems
- HP-UX commands, HP-UX Commands
- HP-UX runstate, Unresponsive Terminals
- HP-UX System
Management Homepage
- text-based, HP-UX System Management Homepage (Text-Based)
- web-based, HP-UX System Management Homepage (Web-Based)
- hpux, Booting into LVM Maintenance Mode
- hpux.efi, Load and initiate the HP-UX operating system:, Using the EFI Shell to Manually Boot Your System, Booting from an Alternate Boot Device
- changing autoexecute file, Changing the Contents of an AUTO File on a Boot Device
- showauto
command, Changing the Contents of an AUTO File on a Boot Device
I- id numbers, Summary of Additional Printer Tasks
- identifying
runstate, Unresponsive Terminals
- Ignite-UX, Managing Software
- importing
- moving
imported directory, Moving a Directory to a Logical Volume on Another System
- included files, Defining What Files and Directories to Back Up
- increasing
number of nfsd daemons, Increasing the Number of nfsd Daemons
- incremental backups, Full Backups vs. Incremental Backups
- index
files
- viewing using frecover, Creating the Index File on the Local Device
- inetd, Adding a Remote Printer to the LP Spooler
- Initial
System Loader, A Standard Boot (PA-RISC Systems), Booting from an Alternate Kernel
- inittab entries, Unresponsive Terminals
- installing new system
- Ignite-UX, Managing Software
- Internet daemon, Adding a Remote Printer to the LP Spooler
- IO_HW system self
test, SpeedyBoot Tests
- ISL
- lsautofl command, Changing the Contents of the Autoexecute File
- ISL. See Initial System Loader, A Standard Boot (PA-RISC Systems)
K- kernel
- configuring drivers, Adding a Local Printer to the LP Spooler
- kernel file selection, Kernel file selection:, Booting from an Alternate Kernel File, Booting from an alternate kernel file called “testvmunix”, Booting from an Alternate Kernel
- kernel parameters, Configurable Kernel Parameters
- kernel
resource monitor, Kernel Resource Monitor (KRM)
- kill, Solving Common Printer Problems
- killing processes, Unresponsive Terminals
- Korn shell
- environment variable, Setting Up Non-HP Terminals
L- large file
- find, Finding Large Files
- large files
- backup, Backing Up Large Files
- restoring, Restoring Large Files
- large files support, Managing Large Files
- large-files
file system, Creating a Large-Files File System
- late_cpu system self
test, SpeedyBoot Tests, Using setboot to Configure SpeedyBoot Settings
- LIF
area, Changing the Contents of the Autoexecute File
- LIF
Volume, A Standard Boot (PA-RISC Systems)
- local
home directory
- sharing, Exporting a Local Home Directory
- local printer
- adding to LP spooler, Adding a Local Printer to the LP Spooler
- logging
- ftp information, Logging FTP Session Information
- logical volume
- adding, Adding a Logical Volume
- adding with mirroring, Adding a Logical Volume with Mirroring
- extending, Extending a Logical Volume, Extending a Logical Volume When You Can’t Use HP SMH
- reducing, Reducing a Logical Volume
- removing, Removing a Logical Volume
- removing a mirror, Adding a Mirror for an Existing Logical Volume Using Non-strict Mirroring, Adding a Mirror to an Existing Logical Volume Using Strict Mirroring
- login
- on multiple
systems, Accessing Multiple Systems
- LP spooler
- initializing, Initializing the LP Spooler
- local printer, Adding a Local Printer to the LP Spooler
- printer
class, Creating a Printer Class
- remote printer, Adding a Remote Printer to the LP Spooler
- statistics, Summary of Additional Printer Tasks
- stopping and restarting, Stopping and Restarting the LP Spooler
- lpadmin, Changing a Printer’s Default Request Priority, Adding a Local Printer to the LP Spooler, Adding a Remote Printer to the LP Spooler, Creating a Printer Class, Removing a Printer from the LP Spooler, Removing a Printer from a Printer Class
- lpalt, Summary of Additional Printer Tasks
- lpana, Summary of Additional Printer Tasks
- lpcancel, Removing a Printer from the LP Spooler
- lpdmin, Removing a Printer Class
- lpfence, Setting a Printer’s Fence Priority
- lpmove, Summary of Additional Printer Tasks, Removing a Printer from the LP Spooler, Removing a Printer Class
- lpsched, Summary of Additional Printer Tasks, Adding a Local Printer to the LP Spooler
- lpshut, Summary of Additional Printer Tasks, Creating a Printer Class
- LPspooler
- adding
remote printer, Adding a Remote Printer to the LP Spooler
- lpstat, Stopping and Restarting the LP Spooler, Summary of Additional Printer Tasks, Removing a Printer from the LP Spooler, Removing a Printer Class
- lshut, Adding a Local Printer to the LP Spooler, Adding a Remote Printer to the LP Spooler
- lvdisplay, Determining the EFI disk partition of your current boot device using LVM
- LVM
- adding a directory
from another system, Moving a Directory to a Logical Volume on Another System
- adding a disk, Adding a Disk to a Volume Group
- adding a logical
volume, Adding a Logical Volume
- adding LV with mirroring, Adding a Logical Volume with Mirroring
- backup, Backing Up If You Are Using LVM
- configuration information, Booting into LVM Maintenance Mode
- diagramming
system’s disks, Diagramming a System’s Disk Usage
- extending a logical volume, Extending a Logical Volume, Extending a Logical Volume When You Can’t Use HP SMH
- reducing a logical volume, Reducing a Logical Volume
- removing a
logical volume, Removing a Logical Volume
- removing a
mirror, Adding a Mirror for an Existing Logical Volume Using Non-strict Mirroring, Adding a Mirror to an Existing Logical Volume Using Strict Mirroring
- LVM maintenance
mode, Booting into LVM (or VxVM) Maintenance Mode, Booting into LVM Maintenance Mode
M- machine model,
determining, Determining What Version of the HP-UX Operating System is Running
- mail server
- shutting
down, Mail Server
- maintenance mode (LVM), Booting into LVM (or VxVM) Maintenance Mode
- major number, Unresponsive Terminals
- managing
large files, Managing Large Files
- manual booting
- using the EFI shell, Using the EFI Shell to Manually Boot Your System
- map, Booting from an Alternate Kernel File, Changing the Contents of an AUTO File on a Boot Device, Booting into Single-User Mode
- measuring
performance, Measuring Performance
- memory
- usage (vmstat), Measuring Memory Usage with vmstat
- Memory_init system
self test, SpeedyBoot Tests
- minor number, Unresponsive Terminals
- mirroring
- adding logical volume with, Adding a Logical Volume with Mirroring
- removing
from logical volume, Adding a Mirror for an Existing Logical Volume Using Non-strict Mirroring, Adding a Mirror to an Existing Logical Volume Using Strict Mirroring
- mkboot, Changing the Contents of the Autoexecute File
- mkfs -m
- file system
characteristics, Examining File System Characteristics
- monitor
- event, Kernel Resource Monitor (KRM)
- kernel resource, Kernel Resource Monitor (KRM)
- mount point, Restoring Your Data Using HP-UX Commands
- moving a directory, Moving a Directory (within a File System)
- moving a system, Moving a System
- multi-user mode, Unresponsive Terminals
- multiple systems
- accessing, Accessing Multiple Systems
N- name server
- shutting
down, Name Server
- netstat
-i
- network overload, Checking for Socket Overflows with netstat -s
- netstat -s
- socket overflows, Checking for Socket Overflows with netstat -s
- network
- overload, Checking for Socket Overflows with netstat -s
- Network File System (NFS)
- crossing mount points, Restoring Your Data Using HP-UX Commands
- network gateway
- shutting down, Network Gateway
- network host
- setting
up, Setting up a Network Host (Building a Depot)
- network
overload, Checking for Network Overload with netstat -i
- network printer
- adding, Adding a Network-Based Printer
- NFS
- and fuser, Extending a Logical Volume
- asynchronous
writes, Checking for Asynchronous Writes
- configuring
server (HP SMH), Exporting a File System (HP-UX to HP-UX)
- increasing nfsds, Increasing the Number of nfsd Daemons
- moving shared
directories between systems, Moving a Directory to a Logical Volume on Another System
- network overload, Checking for Socket Overflows with netstat -s
- nfsstat -rc, Checking for Server Overload with nfsstat -rc
- performance, Managing System Performance
- server overload, Checking for Server Overload with nfsstat -rc
- server/client block size, Checking NFS Server/Client Block Size
- shareall -F nfs, Exporting a File System (HP-UX to HP-UX)
- sharing, Exporting a File System (HP-UX to HP-UX)
- NFS client
- block
size, Checking NFS Server/Client Block Size
- moving
imported directory, Moving a Directory to a Logical Volume on Another System
- performance, Managing System Performance
- NFS clients
- shutting
down, NFS Client
- NFS cluster clients, Normal (Planned) Shutdown
- NFS cluster
server, Normal (Planned) Shutdown
- NFS file server
- shutting down, NFS File Server
- NFS server
- /etc/dfs/dfstab, Exporting a File System (HP-UX to HP-UX)
- adding
a disk, Adding a Disk to a Volume Group
- adding
a logical volume, Adding a Logical Volume
- block size, Checking NFS Server/Client Block Size
- configuring, Exporting a File System (HP-UX to HP-UX)
- configuring (HP SMH), Exporting a File System (HP-UX to HP-UX)
- increasing nfsds, Increasing the Number of nfsd Daemons
- moving
directory to another server, Moving a Directory to a Logical Volume on Another System
- performance, Managing System Performance
- shareall
-F nfs, Exporting a File System (HP-UX to HP-UX)
- sharing files, Exporting a File System (HP-UX to HP-UX)
- socket overflows, Checking for Socket Overflows with netstat -s
- nfsd
- and /etc/dfs/dfstab, Exporting a File System (HP-UX to HP-UX)
- increasing
number of, Increasing the Number of nfsd Daemons
- nfsstat -rc
- server
overload, Checking for Server Overload with nfsstat -rc
- non-HP terminals, Setting Up Non-HP Terminals
- NONHPTERM fileset, Setting Up Non-HP Terminals
P- panics
- when booting
HP Integrity Servers, ACPI Configuration for HP-UX Must Be “default” on nPartitionable HP Integrity Servers
- panics. (see system panics)
- parameters
- tunable
kernel, Configurable Kernel Parameters
- PATH
- default setting, Normal (Planned) Shutdown
- PCI OL*, On-line Addition and Replacement of PCI Cards (OLA/R), Adding Peripherals
- PDH system self test, SpeedyBoot Tests
- performance
- asynchronous writes, Checking for Asynchronous Writes
- file
system defragmenting, Making Changes
- guidelines, Guidelines
- improvement, Checking for Asynchronous Writes
- increasing
number of nfsd daemons, Increasing the Number of nfsd Daemons
- measuring, Measuring Performance
- memory usage, Measuring Memory Usage with vmstat
- network overload, Checking for Network Overload with netstat -i
- socket overflows, Checking for Socket Overflows with netstat -s
- system, Managing System Performance
- peripherals
- adding, Adding Peripherals
- local
printer, Adding a Local Printer to the LP Spooler
- network-based
printer, Adding a Network-Based Printer
- permissions
- changing
for a subtree, Moving a Directory (within a File System)
- Platform system self
test, SpeedyBoot Tests
- plotters
- features, Managing Printers
- popping
the directory stack, Popping the Directory Stack
- POSIX shell
- environment
variable, Setting Up Non-HP Terminals
- power failures, Power Failure
- Primary Boot Path
- setting using the Boot Console
Handler, Setting the PRI (Primary Boot Path) Using the BCH
- setting using the setboot command, Setting the PRI, HAA, and ALT Boot Paths Using the HP-UX setboot Command:
- primary boot
path, Boot device selection:, Changing the PRI, HAA, and ALT Boot Paths, Boot device selection:, Changing the PRI, HAA, and ALT Boot Paths
- print request
- alter, Summary of Additional Printer Tasks
- cancel, Summary of Additional Printer Tasks
- id numbers, Summary of Additional Printer Tasks
- move
destination, Summary of Additional Printer Tasks
- status, Summary of Additional Printer Tasks
- printer
- adding a local printer, Adding a Local Printer to the LP Spooler
- adding a remote printer, Adding a Remote Printer to the LP Spooler
- adding network-based printer, Adding a Network-Based Printer
- classes, Creating a Printer Class
- daemon, Adding a Remote Printer to the LP Spooler
- disabling, Enabling or Disabling a Printer
- enabling, Enabling or Disabling a Printer
- local printer, Adding a Local Printer to the LP Spooler
- network-based, Adding a Network-Based Printer
- order of printing, Setting a Printer’s Fence Priority
- problems and solutions, Solving Common Printer Problems
- remote, Adding a Remote Printer to the LP Spooler
- removing from a class, Removing a Printer from a Printer Class
- request flow, Controlling the Flow of Print Requests
- status, Summary of Additional Printer Tasks
- tasks, Summary of Additional Printer Tasks
- printer class
- creating, Creating a Printer Class
- removing, Removing a Printer Class
- removing
a printer, Removing a Printer from a Printer Class
- removing printer, Removing a Printer Class
- problems
- with terminals, Troubleshooting Problems with Terminals, Other Terminal Problems
- processes
- associated
w/terminals, Unresponsive Terminals
- terminating, Unresponsive Terminals
R- rdump, Choosing the Type of Storage Device
- reboot, Booting into LVM Maintenance Mode
- recovery system, Recovering From a System Crash
- reducing
a logical volume
- command line, Reducing a Logical Volume
- reject, Controlling the Flow of Print Requests, Removing a Printer from the LP Spooler, Removing a Printer Class
- remoing printer
- printer class, Removing a Printer Class
- remote printer
- adding to the LP spooler, Adding a Remote Printer to the LP Spooler
- daemon, Adding a Remote Printer to the LP Spooler
- remote
system
- backup, Backing Up Files on a Remote System
- removing
a logical volume
- HP SMH, Removing a Logical Volume
- removing
a mirror from a logical volume
- HP SMH, Adding a Mirror for an Existing Logical Volume Using Non-strict Mirroring, Adding a Mirror to an Existing Logical Volume Using Strict Mirroring
- resizing VxFS, Defragmenting a JFS File System
- restore, Choosing the Type of Storage Device
- restoring data
- all files, Determining What Data to Restore, Restoring Your Data Using HP-UX Commands
- cartridge tapes, Examples of Restoring Data
- DDS format (DAT) tape, Examples of Restoring Data
- frecover, Restoring Your Data Using HP-UX Commands, Examples of Restoring Data
- HP-UX commands, Restoring Your Data Using HP-UX Commands
- index files, Creating the Index File on the Local Device
- individual files, Determining What Data to Restore, Restoring Your Data Using HP-UX Commands, Examples of Restoring Data
- retrieving index from tape, Creating the Index File on the Local Device
- to a new location, Examples of Restoring Data
- restoring large files, Restoring Large Files
- returning to last directory, Popping the Directory Stack
- rlpdaemon, Adding a Remote Printer to the LP Spooler
- rrestore, Choosing the Type of Storage Device
- run
level
- checking, Checking the System’s Run Level
- run-level
- configuration, Customizing Start-up and Shutdown
- runstate, Unresponsive Terminals
- rvxdump, Choosing the Type of Storage Device
- rvxrestore, Choosing the Type of Storage Device
S- scheduling
a cron job, Scheduling a cron Job
- SELFTESTS
system self test, SpeedyBoot Tests
- server
- diagramming
disks, Diagramming a System’s Disk Usage
- measuring
memory usage, Measuring Memory Usage with vmstat
- NFS, /etc/dfs/dfstab, Exporting a File System (HP-UX to HP-UX)
- NFS, configuring, Exporting a File System (HP-UX to HP-UX)
- NFS, configuring (HP SMH), Exporting a File System (HP-UX to HP-UX)
- NFS, shareall
-F nfs, Exporting a File System (HP-UX to HP-UX)
- NFS,LVM
examples, Managing Disks - Quick Reference Examples
- overload, Checking for Server Overload with nfsstat -rc
- performance, Managing System Performance
- performance, measuring, Measuring Performance
- sharingl
home directories, Adding a User to Several Systems: A Case Study
- socket overflows, Checking for Socket Overflows with netstat -s
- Serviceguard, Using Serviceguard
- setboot, Determining the EFI disk partition of your current boot device using LVM, Displaying Current SpeedyBoot Settings for your System (HP 9000 sample output), Configuring Boot-Time System Tests from a Booted System, Using setboot to Configure SpeedyBoot Settings
- setting boot paths, Setting the PRI, HAA, and ALT Boot Paths Using the HP-UX setboot Command:, Changing the PRI, HAA, and ALT Boot Paths, Booting PA-RISC Systems from an Alternate Boot Source
- setting
the autoboot flag, Enable Autoboot (using EFI Shell’s autoboot command), Setting Autoboot and Autosearch Flags Using the HP-UX setboot Command
- setting the autosearch flag, Enabling the Autosearch Flag Using setboot
- setting
up network host depot, Setting up a Network Host (Building a Depot)
- share, Restoring Your Data Using HP-UX Commands
- sharing new file systems, Exporting a File System (HP-UX to HP-UX)
- SharedPrint
- when adding a local printer, Adding a Local Printer to the LP Spooler
- sharing
- home directories (server), Adding a User to Several Systems: A Case Study
- HP SMH, Exporting a File System (HP-UX to HP-UX)
- HP-UX commands, Exporting a File System (HP-UX to HP-UX)
- HP-UX to
HP-UX, Exporting a File System (HP-UX to HP-UX)
- local home directory, Exporting a Local Home Directory
- moving
directory to another server, Moving a Directory to a Logical Volume on Another System
- shareall -F nfs, Exporting a File System (HP-UX to HP-UX)
- shells
- C, Setting Up Non-HP Terminals
- Korn, Setting Up Non-HP Terminals
- shortening boot time, Speeding the Boot: SpeedyBoot
- showauto, Changing the Contents of an AUTO File on a Boot Device
- shutdown, Normal (Planned) Shutdown
- after delay and reboot, Shutdown and Reboot with Wait
- customizing, Customizing Start-up and Shutdown
- normal, Normal (Planned) Shutdown
- overview, Shutting Down Systems
- required permission, Normal (Planned) Shutdown
- to single-user mode, Shutdown to Single-User Mode
- with reboot, Shutdown and Reboot
- shutdowns
- abnormal, Configuring Dump Devices
- avoiding, Avoiding a Shutdown When Possible
- system panics, System Crashes / HP-UX Panics
- unclean, Unclean Shutdowns
- shutting down
- mail servers, Mail Server
- name servers, Name Server
- network gateways, Network Gateway
- NFS clients, NFS Client
- NFS file servers, NFS File Server
- single-user
mode, Booting into Single-User Mode, Boot HP-UX in single-user mode on an HP 9000 System:, Shutdown to Single-User Mode, Single-User Mode, Unresponsive Terminals
- checking for, Checking the System’s Run Level
- socket
overflows, Checking for Socket Overflows with netstat -s
- SpeedyBoot, Speeding the Boot: SpeedyBoot
- current settings, Viewing your System’s SpeedyBoot Settings
- viewing current settings, Viewing your System’s SpeedyBoot Settings
- SpeedyBoot
Tests. See system self tests, System Boot Tests
- standard boot
- HP
9000 Systems, Booting HP-UX on HP 9000 (PA-RISC) Systems: Details and Variations
- HP
Integrity Servers, A Standard Boot
- startup
- customizing, Customizing Start-up and Shutdown
- static
tunable kernel parameters, Configurable Kernel Parameters
- statistics, displaying, Summary of Additional Printer Tasks
- status
- processes, The top Command
- storage device, Choosing the Type of Storage Device
- strict mirroring, Adding a Logical Volume with Mirroring
- Support Plus, Kernel Resource Monitor (KRM)
- system
- diagramming
disks, Diagramming a System’s Disk Usage
- move, Moving a System
- moving, Moving a System
- parameters, Configurable Kernel Parameters
- performance, Managing System Performance
- performance, guidelines, Guidelines
- performance, measuring, Measuring Performance
- processes status, The top Command
- system crash, Recovering From a System Crash
- system crashes. See system panics, Configuring Dump Devices
- system failures
- recovering from, Recovering From a System Crash
- System Management Homepage (see HP SMH)
- system
panics, System Crashes / HP-UX Panics, Configuring Dump Devices
- effect on self test execution, Speeding the Boot: SpeedyBoot
- system runstate, Unresponsive Terminals
- system self test
- all, SpeedyBoot Tests
- CEC, SpeedyBoot Tests
- Chipset, SpeedyBoot Tests
- early_cpu, SpeedyBoot Tests
- FASTBOOT, SpeedyBoot Tests
- Full_memory, SpeedyBoot Tests
- full_memory, SpeedyBoot Tests
- IO_HW, SpeedyBoot Tests
- late_cpu, SpeedyBoot Tests
- Memory_init, SpeedyBoot Tests
- PDH, SpeedyBoot Tests
- Platform, SpeedyBoot Tests
- SELFTESTS, SpeedyBoot Tests
- system self tests
- all, Using setboot to Configure SpeedyBoot Settings
- bypassing, Speeding the Boot: SpeedyBoot
- configuring, Speeding the Boot: SpeedyBoot
- configuring from a booted system, Configuring Boot-Time System Tests from a Booted System
- configuring from the Boot Console
Handler, Configuring Boot-Time System Tests from the BCH Menu (HP 9000 Systems Only)
- configuring from the EFI shell, Configuring Boot-Time System Tests from the EFI Shell (HP Integrity Servers Only)
- definitions of, System Boot Tests
- FASTBOOT, Configuring Boot-Time System Tests from the BCH Menu (HP 9000 Systems Only)
- full_memory, Using setboot to Configure SpeedyBoot Settings
- how system panics effect execution, Speeding the Boot: SpeedyBoot
- HP recommendations, Configuring Boot-Time System Tests from the BCH Menu (HP 9000 Systems Only)
- late_cpu, Using setboot to Configure SpeedyBoot Settings
T- tape
- copying software, Copying Software From Tape
- tar, Choosing the Type of Storage Device
- examples, Backing Up and Recovering Directories: Quick Reference for tar
- scheduling (cron example), Scheduling a cron Job
- tcio, Examples of Restoring Data
- TERM, Setting Up Non-HP Terminals
- terminal configuration, Unresponsive Terminals
- terminal, resetting, Unresponsive Terminals
- terminals, Troubleshooting Problems with Terminals, Other Terminal Problems
- /usr/share/lib/terminfo/*, Setting Up Non-HP Terminals
- creating
a terminfo file, Setting Up Non-HP Terminals
- non-HP, Setting Up Non-HP Terminals
- terminating processes, Unresponsive Terminals
- terminfo
- creating
a new file, Setting Up Non-HP Terminals
- files, Setting Up Non-HP Terminals
- tic, Setting Up Non-HP Terminals
- timeout
- autoboot, Adjusting the Autoboot Delay, A Standard Boot (PA-RISC Systems)
- troubleshooting
- network overload, Checking for Network Overload with netstat -i
- performance, Measuring Performance
- printer problems, Solving Common Printer Problems
- tunable parameters, Configurable Kernel Parameters
V- version, operating system, Determining What Version of the HP-UX Operating System is Running
- vgcfgbackup, Determining What Data to Back Up
- viewing current SpeedyBoot settings, Displaying Current SpeedyBoot Settings for your System (HP 9000 sample output)
- vmstat
- memory usage, Measuring Memory Usage with vmstat
- vmunix, Kernel file selection:, Booting from an Alternate Kernel File
- vxdump, Choosing the Type of Storage Device
- VxFS
- backing up, Choosing an HP-UX Backup/Recovery Utility
- recovering, Choosing an HP-UX Backup/Recovery Utility
- vxrestore, Choosing the Type of Storage Device
W- wall, Normal (Planned) Shutdown
- who -r
- checking run level, Checking the System’s Run Level
- workgroup
- adding a disk, Adding a Disk to a Volume Group
- adding a logical volume, Adding a Logical Volume
- adding users, Adding Users to a Workgroup
- adding
users, example, Adding a User to Several Systems: A Case Study
- asynchronous writes, Checking for Asynchronous Writes
- client
backup/recovery, Backing Up and Recovering Directories: Quick Reference for tar
- configuring, Managing Printers
- diagramming server’s disks, Diagramming a System’s Disk Usage
- extending
a logical volume, Extending a Logical Volume
- increasing
server’s nfsds, Increasing the Number of nfsd Daemons
- local
home directory, Exporting a Local Home Directory
- login issues, Accessing Multiple Systems
- moving
a directory between systems, Moving a Directory to a Logical Volume on Another System
- moving
a system, Moving a System
- network overload, Checking for Network Overload with netstat -i
- performance,
guidelines, Guidelines
- performance, measuring, Measuring Performance
- remote home directory, Adding a User to Several Systems: A Case Study
- uid issues, Accessing Multiple Systems
- working
- during scheduled downtime, Continuing to Work During a Scheduled Downtime
- writes
- asynchronous, Checking for Asynchronous Writes
|
Printable version
