%define libnss_ldap "`ls /lib/libc-* | sed s/libc/libnss_ldap/`" Summary: NSS library for LDAP. Name: nss_ldap Version: 220 Release: 1 Source0: %{name}-%{version}.tar.bz2 URL: http://www.padl.com/ Copyright: LGPL Group: System Environment/Base BuildRoot: %{_tmppath}/%{name}-root %description This package includes a LDAP access client: nss_ldap. Nss_ldap is a set of C library extensions which allows X.500 and LDAP directory servers to be used as a primary source of aliases, ethers, groups, hosts, networks, protocol, users, RPCs, services and shadow passwords (instead of or in addition to using flat files or NIS). Install nss_ldap if you need LDAP access clients. %prep %setup -q -a 0 %build ./configure --with-ldap-secret-file=/etc/ldap.secret make %install mkdir -p $RPM_BUILD_ROOT/{etc,lib} install -m 755 nss_ldap.so $RPM_BUILD_ROOT%{libnss_ldap} ln -s %{libnss_ldap} $RPM_BUILD_ROOT/lib/libnss_ldap.so.2 cat > $RPM_BUILD_ROOT/etc/nsswitch.ldap << EOF #ident \$Id: nsswitch.ldap,v 2.3 1999/04/13 22:56:43 lukeh Exp \$ # # An example file that could be copied over to /etc/nsswitch.conf; it # uses LDAP conjunction with files. # # "hosts:" and "services:" in this file are used only if the # /etc/netconfig file has a "-" for nametoaddr_libs of "inet" transports. # the following two lines obviate the "+" entry in /etc/passwd and /etc/group. passwd: files ldap group: files ldap # consult DNS first, we will need it to resolve the LDAP host. (If we # can't resolve it, we're in infinite recursion, because libldap calls # gethostbyname(). Careful!) hosts: dns ldap # LDAP is nominally authoritative for the following maps. services: ldap [NOTFOUND=return] files networks: ldap [NOTFOUND=return] files protocols: ldap [NOTFOUND=return] files rpc: ldap [NOTFOUND=return] files ethers: ldap [NOTFOUND=return] files # no support for netmasks, bootparams, publickey yet. netmasks: files bootparams: files publickey: files automount: files # I'm pretty sure nsswitch.conf is consulted directly by sendmail, # here, so we can't do much here. Instead, use bbense's LDAP # rules ofr sendmail. aliases: files sendmailvars: files # No one has written the LDAP support for netgroups yet, so we'll # have to stick with NIS. netgroup: files nis EOF cat > $RPM_BUILD_ROOT/etc/ldap.conf << EOF # @(#)\$Id: ldap.conf,v 1.27 2003/01/17 21:37:12 lukeh Exp \$ # # This is the configuration file for the LDAP nameservice # switch library and the LDAP PAM module. # # PADL Software # http://www.padl.com # # Your LDAP server. Must be resolvable without using LDAP. # Multiple hosts may be specified, each separated by a # space. How long nss_ldap takes to failover depends on # whether your LDAP client library supports configurable # network or connect timeouts (see bind_timelimit). host 127.0.0.1 # The distinguished name of the search base. base dc=padl,dc=com # Another way to specify your LDAP server is to provide an # uri with the server name. This allows to use # Unix Domain Sockets to connect to a local LDAP Server. #uri ldap://127.0.0.1/ #uri ldaps://127.0.0.1/ #uri ldapi://%2fvar%2frun%2fldapi_sock/ # Note: %2f encodes the '/' used as directory separator # The LDAP version to use (defaults to 3 # if supported by client library) #ldap_version 3 # The distinguished name to bind to the server with. # Optional: default is to bind anonymously. #binddn cn=proxyuser,dc=padl,dc=com # The credentials to bind with. # Optional: default is no credential. #bindpw secret # The distinguished name to bind to the server with # if the effective user ID is root. Password is # stored in /etc/ldap.secret (mode 600) #rootbinddn cn=manager,dc=padl,dc=com # The port. # Optional: default is 389. #port 389 # The search scope. #scope sub #scope one #scope base # Search timelimit #timelimit 30 # Bind timelimit #bind_timelimit 30 # Idle timelimit; client will close connections # (nss_ldap only) if the server has not been contacted # for the number of seconds specified below. #idle_timelimit 3600 # Filter to AND with uid=%s #pam_filter objectclass=account # The user ID attribute (defaults to uid) #pam_login_attribute uid # Search the root DSE for the password policy (works # with Netscape Directory Server) #pam_lookup_policy yes # Check the 'host' attribute for access control # Default is no; if set to yes, and user has no # value for the host attribute, and pam_ldap is # configured for account management (authorization) # then the user will not be allowed to login. #pam_check_host_attr yes # Group to enforce membership of #pam_groupdn cn=PAM,ou=Groups,dc=padl,dc=com # Group member attribute #pam_member_attribute uniquemember # Specify a minium or maximum UID number allowed #pam_min_uid 0 #pam_max_uid 0 # Template login attribute, default template user # (can be overriden by value of former attribute # in user's entry) #pam_login_attribute userPrincipalName #pam_template_login_attribute uid #pam_template_login nobody # HEADS UP: the pam_crypt, pam_nds_passwd, # and pam_ad_passwd options are no # longer supported. # Do not hash the password at all; presume # the directory server will do it, if # necessary. This is the default. #pam_password clear # Hash password locally; required for University of # Michigan LDAP server, and works with Netscape # Directory Server if you're using the UNIX-Crypt # hash mechanism and not using the NT Synchronization # service. #pam_password crypt # Remove old password first, then update in # cleartext. Necessary for use with Novell # Directory Services (NDS) #pam_password nds # Update Active Directory password, by # creating Unicode password and updating # unicodePwd attribute. #pam_password ad # Use the OpenLDAP password change # extended operation to update the password. #pam_password exop # Redirect users to a URL or somesuch on password # changes. #pam_password_prohibit_message Please visit http://internal to change your password. # RFC2307bis naming contexts # Syntax: # nss_base_XXX base?scope?filter # where scope is {base,one,sub} # and filter is a filter to be &'d with the # default filter. # You can omit the suffix eg: # nss_base_passwd ou=People, # to append the default base DN but this # may incur a small performance impact. #nss_base_passwd ou=People,dc=padl,dc=com?one #nss_base_shadow ou=People,dc=padl,dc=com?one #nss_base_group ou=Group,dc=padl,dc=com?one #nss_base_hosts ou=Hosts,dc=padl,dc=com?one #nss_base_services ou=Services,dc=padl,dc=com?one #nss_base_networks ou=Networks,dc=padl,dc=com?one #nss_base_protocols ou=Protocols,dc=padl,dc=com?one #nss_base_rpc ou=Rpc,dc=padl,dc=com?one #nss_base_ethers ou=Ethers,dc=padl,dc=com?one #nss_base_netmasks ou=Networks,dc=padl,dc=com?ne #nss_base_bootparams ou=Ethers,dc=padl,dc=com?one #nss_base_aliases ou=Aliases,dc=padl,dc=com?one #nss_base_netgroup ou=Netgroup,dc=padl,dc=com?one # attribute/objectclass mapping # Syntax: #nss_map_attribute rfc2307attribute mapped_attribute #nss_map_objectclass rfc2307objectclass mapped_objectclass # configure --enable-nds is no longer supported. # For NDS now do: #nss_map_attribute uniqueMember member # configure --enable-mssfu-schema is no longer supported. # For MSSFU now do: #nss_map_objectclass posixAccount User #nss_map_attribute uid msSFUName #nss_map_attribute uniqueMember posixMember #nss_map_attribute userPassword msSFUPassword #nss_map_attribute homeDirectory msSFUHomeDirectory #nss_map_objectclass posixGroup Group #pam_login_attribute msSFUName #pam_filter objectclass=User #pam_password ad # configure --enable-authpassword is no longer supported # For authPassword support, now do: #nss_map_attribute userPassword authPassword #pam_password nds # For IBM SecureWay support, do: #nss_map_objectclass posixAccount aixAccount #nss_map_attribute uid userName #nss_map_attribute gidNumber gid #nss_map_attribute uidNumber uid #nss_map_attribute userPassword passwordChar #nss_map_objectclass posixGroup aixAccessGroup #nss_map_attribute cn groupName #nss_map_attribute uniqueMember member #pam_login_attribute userName #pam_filter objectclass=aixAccount #pam_password clear # Netscape SDK LDAPS #ssl on # Netscape SDK SSL options #sslpath /etc/ssl/certs/cert7.db # OpenLDAP SSL mechanism # start_tls mechanism uses the normal LDAP port, LDAPS typically 636 #ssl start_tls #ssl on # OpenLDAP SSL options # Require and verify server certificate (yes/no) # Default is "no" #tls_checkpeer yes # CA certificates for server certificate verification # At least one of these are required if tls_checkpeer is "yes" #tls_cacertfile /etc/ssl/ca.cert #tls_cacertdir /etc/ssl/certs # Seed the PRNG if /dev/urandom is not provided #tls_randfile /var/run/egd-pool # SSL cipher suite # See man ciphers for syntax #tls_ciphers TLSv1 # Client certificate and key # Use these, if your server requires client authentication. #tls_cert #tls_key EOF %files %defattr(-,root,root) %attr(0755,root,root) /lib/*.so* %attr(0644,root,root) /etc/nsswitch.ldap %attr(0644,root,root) %config(noreplace) /etc/ldap.conf %doc ANNOUNCE README ChangeLog AUTHORS NEWS COPYING %doc nsswitch.ldap