HP-UX System Administrator's Guide: Routine Management Tasks: HP-UX 11i Version 3

List of Examples

2-1 Setting the autoboot delay using the EFI Boot Manager’s Boot Options:

2-2 Setting the autoboot delay using the EFI Shell’s autoboot command:

2-3 Enable Autoboot (using EFI Shell’s autoboot command)

2-4 Disable Autoboot (using EFI Shell’s autoboot command)

2-5 Enable Autoboot (using setboot from a running HP-UX system)

2-6 Disable Autoboot (using setboot from a running HP-UX system)

2-7 Booting from an alternate kernel file called “testvmunix”

2-8 Determining the EFI disk partition of your current boot device using LVM

2-9 Enabling the Autoboot Flag Using setboot

2-10 Disabling the Autoboot Flag Using setboot

2-11 Enabling the Autosearch Flag Using setboot

2-12 Disabling the Autosearch Flag Using setboot

2-13 Setting the PRI (Primary Boot Path) Using the BCH

2-14 Setting the HAA (High-Availability Alternate Boot Path) Using the BCH

2-15 Setting the ALT (Alternate Boot Path) Using the BCH

2-16 Setting the ALT (Alternate Boot Path) Using the BCH

2-17 Boot from the boot device specified in the ALT boot path

2-18 Boot from the boot device specified at hardware address 0/0/2/0/0.14:

2-19 Boot from the boot device specified at path label P2:

2-20 Boot from the default HP-UX install server

2-21 Boot from the HP-UX install server at 192.nn.xx.yyy

2-22 Boot HP-UX in single-user mode on an HP 9000 System:

2-23 Example Single-User HP-UX Boot

2-24 Displaying Current SpeedyBoot Settings for your System (HP 9000 sample output)

2-25 Displaying Current SpeedyBoot Settings for your System (HP Integrity Server sample output)

2-26 Shutdown and Reboot

2-27 Shutdown and Reboot with Wait

2-28 Shutdown and Halt

2-29 Shutdown to Single-User Mode

3-1 Producing a directory listing sorted by size

3-2 Finding files larger than a specific size