Jump to content
United States-English
HP.com HomeProducts and ServicesSupport and DriversSolutionsHow to Buy
» Contact HP
Or call 800-727-2472

Download Ignite-UX

Get the latest version of Ignite-UX.
Content starts here

Downloading Ignite-UX

From a single server running HP-UX 11i and this version of Ignite-UX, you can install 11i v1 (B.11.11), 11i v2 (B.11.23), or 11i v3 (B.11.31) onto your client systems.

Each release of Ignite-UX contains the fixes and enhancements from previous Ignite-UX releases. This ensures you have the latest software in one cohesive download.

HP recommends you install the complete Ignite-UX product (IGNITE) unless you want to block the use of a specific version of HP-UX, increase the download speed, or conserve disk space on the server.


To install HP-UX versions:

11i v1 (B.11.11) only

11i v2 (B.11.23) only

11i v3 (B.11.31) only

All supported HP-UX versions

Download this depot:



» Ignite-UX C.7.7.98
September, 2008 Release




Installation Tips

You can use the swinstall command to install Ignite-UX from a depot. For example, to install the C.7.7.98 complete product bundle that installs all supported versions of HP-UX from a depot stored in /var/tmp, you can use the following command:

swinstall -s /var/tmp/Ignite-UX_ALL_C.7.7.98.depot IGNITE

Required pax Patches

When Ignite-UX creates a system archive with make_sys_image(1M) or make_[tape|net]_recovery(1M), the pax(1M) utility is used. You should install the latest patch for pax on the system where you will be creating your archive.

To obtain the appropriate patch from the IT Resource Center:

  1. Go to the IT Resource Center.
  2. From the "maintenance and support for hp products" menu, select "find individual patches."
  3. Complete the brief registration if you have not previously registered with the ITRC.
  4. Select "HP-UX," then follow the on-screen instructions given for searching the Patch Database and obtaining patches.