| PostgreSQL 8.2.6 Documentation | ||||
|---|---|---|---|---|
| Prev | Fast Backward | Chapter 9. Functions and Operators | Fast Forward | Next |
The geometric types point , box , lseg , line , path , polygon , and circle have a large set of native support functions and operators, shown in Table 9-28 , Table 9-29 , and Table 9-30 .
| Caution |
|
Note that the "same as" operator, ~= , represents the usual notion of equality for the point , box , polygon , and circle types. Some of these types also have an = operator, but = compares for equal areas only. The other scalar comparison operators ( <= and so on) likewise compare areas for these types. |
Table 9-28. Geometric Operators
| Operator | Description | Example |
|---|---|---|
| + | Translation | box '((0,0),(1,1))' + point '(2.0,0)' |
| - | Translation | box '((0,0),(1,1))' - point '(2.0,0)' |
| * | Scaling/rotation | box '((0,0),(1,1))' * point '(2.0,0)' |
| / | Scaling/rotation | box '((0,0),(2,2))' / point '(2.0,0)' |
| # | Point or box of intersection | '((1,-1),(-1,1))' # '((1,1),(-1,-1))' |
| # | Number of points in path or polygon | # '((1,0),(0,1),(-1,0))' |
| @-@ | Length or circumference | @-@ path '((0,0),(1,0))' |
| @@ | Center | @@ circle '((0,0),10)' |
| ## | Closest point to first operand on second operand | point '(0,0)' ## lseg '((2,0),(0,2))' |
| <-> | Distance between | circle '((0,0),1)' <-> circle '((5,0),1)' |
| && | Overlaps? | box '((0,0),(1,1))' && box '((0,0),(2,2))' |
| << | Is strictly left of? | circle '((0,0),1)' << circle '((5,0),1)' |
| >> | Is strictly right of? | circle '((5,0),1)' >> circle '((0,0),1)' |
| &< | Does not extend to the right of? | box '((0,0),(1,1))' &< box '((0,0),(2,2))' |
| &> | Does not extend to the left of? | box '((0,0),(3,3))' &> box '((0,0),(2,2))' |
| <<| | Is strictly below? | box '((0,0),(3,3))' <<| box '((3,4),(5,5))' |
| |>> | Is strictly above? | box '((3,4),(5,5))' |>> box '((0,0),(3,3))' |
| &<| | Does not extend above? | box '((0,0),(1,1))' &<| box '((0,0),(2,2))' |
| |&> | Does not extend below? | box '((0,0),(3,3))' |&> box '((0,0),(2,2))' |
| <^ | Is below (allows touching)? | circle '((0,0),1)' <^ circle '((0,5),1)' |
| >^ | Is above (allows touching)? | circle '((0,5),1)' >^ circle '((0,0),1)' |
| ?# | Intersects? | lseg '((-1,0),(1,0))' ?# box '((-2,-2),(2,2))' |
| ?- | Is horizontal? | ?- lseg '((-1,0),(1,0))' |
| ?- | Are horizontally aligned? | point '(1,0)' ?- point '(0,0)' |
| ?| | Is vertical? | ?| lseg '((-1,0),(1,0))' |
| ?| | Are vertically aligned? | point '(0,1)' ?| point '(0,0)' |
| ?-| | Is perpendicular? | lseg '((0,0),(0,1))' ?-| lseg '((0,0),(1,0))' |
| ?|| | Are parallel? | lseg '((-1,0),(1,0))' ?|| lseg '((-1,2),(1,2))' |
| @> | Contains? | circle '((0,0),2)' @> point '(1,1)' |
| <@ | Contained in or on? | point '(1,1)' <@ circle '((0,0),2)' |
| ~= | Same as? | polygon '((0,0),(1,1))' ~= polygon '((1,1),(0,0))' |
Note: Before PostgreSQL 8.2, the containment operators @> and <@ were respectively called ~ and @ . These names are still available, but are deprecated and will eventually be retired.
Table 9-29. Geometric Functions
| Function | Return Type | Description | Example |
|---|---|---|---|
area
(
object
)
|
double precision | area | area(box '((0,0),(1,1))') |
center
(
object
)
|
point | center | center(box '((0,0),(1,2))') |
diameter
(
circle
)
|
double precision | diameter of circle | diameter(circle '((0,0),2.0)') |
height
(
box
)
|
double precision | vertical size of box | height(box '((0,0),(1,1))') |
isclosed
(
path
)
|
boolean | a closed path? | isclosed(path '((0,0),(1,1),(2,0))') |
isopen
(
path
)
|
boolean | an open path? | isopen(path '[(0,0),(1,1),(2,0)]') |
length
(
object
)
|
double precision | length | length(path '((-1,0),(1,0))') |
npoints
(
path
)
|
int | number of points | npoints(path '[(0,0),(1,1),(2,0)]') |
npoints
(
polygon
)
|
int | number of points | npoints(polygon '((1,1),(0,0))') |
pclose
(
path
)
|
path | convert path to closed | pclose(path '[(0,0),(1,1),(2,0)]') |
popen
(
path
)
|
path | convert path to open | popen(path '((0,0),(1,1),(2,0))') |
radius
(
circle
)
|
double precision | radius of circle | radius(circle '((0,0),2.0)') |
width
(
box
)
|
double precision | horizontal size of box | width(box '((0,0),(1,1))') |
Table 9-30. Geometric Type Conversion Functions
| Function | Return Type | Description | Example |
|---|---|---|---|
box
(
circle
)
|
box | circle to box | box(circle '((0,0),2.0)') |
box
(
point
,
point
)
|
box | points to box | box(point '(0,0)', point '(1,1)') |
box
(
polygon
)
|
box | polygon to box | box(polygon '((0,0),(1,1),(2,0))') |
circle
(
box
)
|
circle | box to circle | circle(box '((0,0),(1,1))') |
circle
(
point
,
double precision
)
|
circle | center and radius to circle | circle(point '(0,0)', 2.0) |
circle
(
polygon
)
|
circle | polygon to circle | circle(polygon '((0,0),(1,1),(2,0))') |
lseg
(
box
)
|
lseg | box diagonal to line segment | lseg(box '((-1,0),(1,0))') |
lseg
(
point
,
point
)
|
lseg | points to line segment | lseg(point '(-1,0)', point '(1,0)') |
path
(
polygon
)
|
point | polygon to path | path(polygon '((0,0),(1,1),(2,0))') |
point
(
double precision
,
double precision
)
|
point | construct point | point(23.4, -44.5) |
point
(
box
)
|
point | center of box | point(box '((-1,0),(1,0))') |
point
(
circle
)
|
point | center of circle | point(circle '((0,0),2.0)') |
point
(
lseg
)
|
point | center of line segment | point(lseg '((-1,0),(1,0))') |
point
(
polygon
)
|
point | center of polygon | point(polygon '((0,0),(1,1),(2,0))') |
polygon
(
box
)
|
polygon | box to 4-point polygon | polygon(box '((0,0),(1,1))') |
polygon
(
circle
)
|
polygon | circle to 12-point polygon | polygon(circle '((0,0),2.0)') |
polygon
(
npts
,
circle
)
|
polygon | circle to npts -point polygon | polygon(12, circle '((0,0),2.0)') |
polygon
(
path
)
|
polygon | path to polygon | polygon(path '((0,0),(1,1),(2,0))') |
It is possible to access the two component numbers of a point as though it were an array with indices 0 and 1. For example, if t.p is a point column then SELECT p[0] FROM t retrieves the X coordinate and UPDATE t SET p[1] = ... changes the Y coordinate. In the same way, a value of type box or lseg may be treated as an array of two point values.
The
area
function works for the types
box
,
circle
, and
path
. The
area
function only works on the
path
data type if the points in the
path
are non-intersecting. For example, the
path
'((0,0),(0,1),(2,1),(2,2),(1,2),(1,0),(0,0))'::PATH
won't work, however, the following visually identical
path
'((0,0),(0,1),(1,1),(1,2),(2,2),(2,1),(1,1),(1,0),(0,0))'::PATH
will work. If the concept of an intersecting versus non-intersecting
path
is confusing, draw both of the above
path
s side by side on a piece of graph paper.