Network Working Group S. Kille
Request for Comments: 1779 ISODE Consortium
Obsoletes: 1485 March 1995
Category: Standards Track
A String Representation of Distinguished Names
Status of this Memo
This document specifies an Internet standards track protocol for the
Internet community, and requests discussion and suggestions for
improvements. Please refer to the current edition of the "Internet
Official Protocol Standards" (STD 1) for the standardization state
and status of this protocol. Distribution of this memo is unlimited.
Abstract
The OSI Directory uses distinguished names as the primary keys to
entries in the directory. Distinguished Names are encoded in ASN.1.
When a distinguished name is communicated between to users not using
a directory protocol (e.g., in a mail message), there is a need to
have a user-oriented string representation of distinguished name.
This specification defines a string format for representing names,
which is designed to give a clean representation of commonly used
names, whilst being able to represent any distinguished name.
Table of Contents
1. Why a notation is needed ................................... 22. A notation for Distinguished Name .......................... 22.1 Goals ................................................ 22.2 Informal definition .................................. 22.3 Formal definition .................................... 43. Examples ................................................... 64. Acknowledgements ........................................... 75. References ................................................. 76. Security Considerations .................................... 87. Author's Address ........................................... 8
Kille [Page 1]
RFC 1779 DN Representation March 1995
Many OSI Applications make use of Distinguished Names (DN) as defined
in the OSI Directory, commonly known as X.500 [1]. This
specification assumes familiarity with X.500, and the concept of
Distinguished Name. It is important to have a common format to be
able to unambiguously represent a distinguished name. This might be
done to represent a directory name on a business card or in an email
message. There is a need for a format to support human to human
communication, which must be string based (not ASN.1) and user
oriented. This notation is targeted towards a general user oriented
system, and in particular to represent the names of humans. Other
syntaxes may be more appropriate for other uses of the directory.
For example, the OSF Syntax may be more appropriate for some system
oriented uses. (The OSF Syntax uses "/" as a separator, and forms
names in a manner intended to resemble UNIX filenames).
The following goals are laid out:
o To provide an unambiguous representation of a distinguished name
o To be an intuitive format for the majority of names
o To be fully general, and able to represent any distinguished name
o To be amenable to a number of different layouts to achieve an
attractive representation.
o To give a clear representation of the contents of the
distinguished name
This notation is designed to be convenient for common forms of name.
Some examples are given. The author's directory distinguished name
would be written:
CN=Steve Kille,
O=ISODE Consortium, C=GB
Kille [Page 2]
RFC 1779 DN Representation March 1995
This may be folded, perhaps to display in multi-column format. For
example:
CN=Steve Kille,
O=ISODE Consortium,
C=GB
Another name might be:
CN=Christian Huitema, O=INRIA, C=FR
Semicolon (";") may be used as an alternate separator. The
separators may be mixed, but this usage is discouraged.
CN=Christian Huitema; O=INRIA; C=FR
In running text, this would be written as <CN=Christian Huitema;
O=INRIA; C=FR>. Another example, shows how different attribute types
are handled:
CN=James Hacker,
L=Basingstoke,
O=Widget Inc,
C=GB
Here is an example of a multi-valued Relative Distinguished Name,
where the namespace is flat within an organisation, and department is
used to disambiguate certain names:
OU=Sales + CN=J. Smith, O=Widget Inc., C=US
The final examples show both methods quoting of a comma in an
Organisation name:
CN=L. Eagle, O="Sue, Grabbit and Runn", C=GB
CN=L. Eagle, O=Sue\, Grabbit and Runn, C=GB
Kille [Page 3]
RFC 1779 DN Representation March 1995
A formal definition can now be given. The structure is specified in
a BNF grammar in Figure 1. This BNF uses the grammar defined in RFC
822, with the terminals enclosed in <> [2]. This definition is in an
abstract character set, and so may be written in any character set
supporting the explicitly defined special characters. The quoting
mechanism is used for the following cases:
o Strings containing ",", "+", "=" or """ , <CR>, "<",
">", "#", or ";".
o Strings with leading or trailing spaces
o Strings containing consecutive spaces
There is an escape mechanism from the normal user oriented form, so
that this syntax may be used to print any valid distinguished name.
This is ugly. It is expected to be used only in pathological cases.
There are two parts to this mechanism:
1. Attributes types are represented in a (big-endian) dotted
notation. (e.g., OID.2.6.53).
2. Attribute values are represented in hexadecimal (e.g. #0A56CF).
Each pair of hex digits defines an octet, which is the ASN.1 Basic
Encoding Rules value of the Attribute Value.
The keyword specification is optional in the BNF, but mandatory for
this specification. This is so that the same BNF may be used for the
related specification on User Friendly Naming [5]. When this
specification is followed, the attribute type keywords must always be
present.
A list of valid keywords for well known attribute types used in
naming is given in Table 1. Keywords may contain spaces, but shall
not have leading or trailing spaces. This is a list of keywords
which must be supported. These are chosen because they appear in
common forms of name, and can do so in a place which does not
correspond to the default schema used. A register of valid keywords
is maintained by the IANA.
Kille [Page 4]
RFC 1779 DN Representation March 1995
<name> ::= <name-component> ( <spaced-separator> )
| <name-component> <spaced-separator> <name>
<spaced-separator> ::= <optional-space>
<separator>
<optional-space>
<separator> ::= "," | ";"
<optional-space> ::= ( <CR> ) *( " " )
<name-component> ::= <attribute>
| <attribute> <optional-space> "+"
<optional-space> <name-component>
<attribute> ::= <string>
| <key> <optional-space> "=" <optional-space> <string>
<key> ::= 1*( <keychar> ) | "OID." <oid> | "oid." <oid>
<keychar> ::= letters, numbers, and space
<oid> ::= <digitstring> | <digitstring> "." <oid>
<digitstring> ::= 1*<digit>
<digit> ::= digits 0-9
<string> ::= *( <stringchar> | <pair> )
| '"' *( <stringchar> | <special> | <pair> ) '"'
| "#" <hex>
<special> ::= "," | "=" | <CR> | "+" | "<" | ">"
| "#" | ";"
<pair> ::= "\" ( <special> | "\" | '"')
<stringchar> ::= any character except <special> or "\" or '"'
<hex> ::= 2*<hexchar>
<hexchar> ::= 0-9, a-f, A-F
Figure 1: BNF Grammar for Distinguished Name
Kille [Page 5]
RFC 1779 DN Representation March 1995
Key Attribute (X.520 keys)
------------------------------
CN CommonName
L LocalityName
ST StateOrProvinceName
O OrganizationName
OU OrganizationalUnitName
C CountryName
STREET StreetAddress
Table 1: Standardised Keywords
Only string type attributes are considered, but other attribute
syntaxes could be supported locally (e.g., by use of the syntexes
defined in [3].) It is assumed that the interface will translate
from the supplied string into an appropriate Directory String
encoding. The "+" notation is used to specify multi-component RDNs.
In this case, the types for attributes in the RDN must be explicit.
The name is presented/input in a little-endian order (most
significant component last). When an address is written in a context
where there is a need to delimit the entire address (e.g., in free
text), it is recommended that the delimiters <> are used. The
terminator > is a special in the notation to facilitate this
delimitation.
This work was based on research work done at University College
London [4], and evolved by the IETF OSI-DS WG.
Input for this version of the document was received from: Allan
Cargille (University of Wisconsin); John Dale (COS); Philip Gladstone
(Onsett); John Hawthorne (US Air Force); Roland Hedberg (University
of Umea); Kipp Hickman (Mosaic Communications Corp.) Markus Kuhn
(University of Erlangen); Elisabeth Roudier (E3X); Mark Wahl (ISODE
Consortium).
[1] The Directory --- overview of concepts, models and services,
1993. CCITT X.500 Series Recommendations.
[2] Crocker, D., "Standard of the Format of ARPA-Internet Text
Messages", STD 11, RFC 822, University of Delaware, August 1982.
[3] Yeong, W., Howes, T., and S. Kille, "Lightweight Directory Access
Protocol", RFC 1777, Performance Systems International,
University of Michigan, ISODE Consortium, March 1995.
[4] S.E. Kille. Using the OSI directory to achieve user friendly
naming. Research Note RN/20/29, Department of Computer Science,
University College London, February 1990.
[5] Kille, S., "Using the OSI Directory to Achieve User Friendly
Naming", RFC 1781, ISODE Consortium, March 1995.
Kille [Page 7]
RFC 1779 DN Representation March 1995