Cisco 3200 Series Router Hardware Reference

• Whole Book PDF of the Cisco 3200 Mobile Access Router Hardware Guide
  Cisco 3200 Series router reference guide.

• Introduction to the Cisco 3200 Series Mobile Access Router Cards
  Conventions and introductory information as it applies to Cisco 3200 Series Mobile Access routers.

• Cisco 3200 Rugged Enclosures
  Cisco 3200 Rugged Enclosures seal the Cisco 3200 Series router cards so that they can withstand the harsh environments that are common in police cars, military vehicles, trains, airborne vehicles, and outdoor locations.

• Cisco 3270 Rugged Router Card
  The core component of a Cisco 3270 Mobile Access Router and is compatible with other Cisco 3200 Series router mobile interface cards (MICs). The Cisco 3270 Rugged Router card is also available as a standalone router card.

• Mobile Access Router Card (MARC)
  The host processor, memory, and headers for the 10/100 Fast Ethernet, console, and auxiliary signals for the Cisco 3200 Series router.

• Fast Ethernet Switch Mobile Interface Card (FESMIC)
  The 4-port FESMIC provides 4 sets of switched 10/100 Fast Ethernet signals. The 2-port FESMIC provides 2 sets of switched 10/100 Fast Ethernet signals.

• Serial Mobile Interface Card (SMIC)
  The SMIC provides the router with 4 high–speed sets of serial signals in both data terminal equipment (DCE) and data circuit equipment (DCE) modes.

• Wireless Mobile Interface Card (WMIC)
  The WMICs provide a 802.11g, 4.9 GHz (public safety), or 802.11h wireless interface and an Ethernet connection to the router.

• Smart Serial Port External Seal
  When a smart serial port is connected by using a cable, a protective heat-shrink tubing should be used to seal the port. This appendix describes the procedure for sealing the port.

• SFP Module Replacement
  How to replace SFP modules on the Cisco 3270 Rugged Router card.